Remarks
Coilover remarks
IV. in development
| 1 | Mounting - we recommend to have our spring system installed by a qualified workshop only |
| 2 | Not suitable for four wheel drive versions |
| 3 | Not for cars with levelling system |
| 5 | Kit consists of two front springs only |
| 6 | Kit consists of two rear springs only |
| 7 | The O.E.rubber topmout dish is available in several heights. By exchanging this dish influence the lowering effect up to 15 mm |
| 8 | The lowering effect is less than indicated for “Elegance” and “Sport” versions |
| 9 | The lowering effect is less than indicated for cars with a factory sport suspension |
| 10 | Please check the diameter of the front strut when ordering a suspensionkit for BMW 3/1, type E30 |
| 11 | The different body versions have a big difference in weight: we therefore can not indicate an exact lowering effect |
| 12 | Not suitable for Stationwagons |
| 13 | To be discontinued: only available as long as stock last |
| 14 | Not for vehicles with 4-matic and versions with long wheel base |
| 15 | The TÜV screw heights must be maintained to preserve warranty |
| 16 | Installing shortened Link rods is necesserry for this coilover kit. The link rods are not included and can be ordered seperately. |
| 17 | Without Electronic Damper Control (EDC) |
| 18 | Not suitable for fourwheel drive, hybrid, raised car versions |
Lowering springs remarks
| 1 | Only suitable with sportshockabsorbers |
| 2 | Cylindrical shape front spring |
| 3 | Pigtailed front spring |
| 5 | Kit consists of two front springs only |
| 6 | Kit consists of two rear springs only |
| 7 | The rubber topmout dish is available in several heights as an original Mercedes Benz part. By exchanging this dish it is possible to influence the lowering effect up to 15 mm |
| 9 | Not applicable for vehicles with factory lowered suspension |
| 10 | The lowering effect is less than indicated for “Elegance” and “Sport” versions |
| 11 | The lowering effect is less than indicated for cars with a factory sport suspension |
| 13 | Please check the diameter of the front strut when ordering a suspensionkit for BMW 3/1, type E30 |
| 15 | Not for cars with levelling system/ active shockabsorber system |
| 17 | The different body versions have a big difference in weight: we therefore can not indicate an exact lowering effect |
| 18 | The lowering effect of Alfa Romeo 145 and 155 is less than indicated in the catalogue, starting models 1995 |
| 19 | Not suitable for four wheel drive versions |
| 21 | Remark only valid for German market |
| 22 | Up to 09/1979: replace top retainer with original part number “171 412 341A” |
| 24 | Not suitable for Stationwagons |
| 25 | Not suitable for 4WS |
| 26 | To be discontinued: only available as long as stock last |
| 27 | Not for vehicles with 4-matic and versions with long wheel base |